Configuring NK8000
46
Building Technologies
048_DMS_NK8000_ICC_MP4.40_A6V10062437_a_en.doc
Fire Safety & Security Products 06.2011
Fig. 31 NW8202 IP configuration download instruction window
Fig. 32 Connect Ethernet cable on NK822x
Fig. 33 Connect Ethernet cables on NK823x
Use a crossed Cat. 5 twisted pair patch cable for direct connection between PC
and NK822x.
In such direct connections with NK823x, you can use a straight-through cable
since these units support automatic crossover.
While the download is being performed, the FTP Diagnostic window is displayed
with the current status of the download. (See Fig. 34.)
Ethernet cable
goes here
NK822x
Back
Note the different dip-
switch depending on
the NK82xx model
Ethernet cable
goes here
(NK823x)
Back
X3: Ethernet 1
X2: Ethernet 2
To Next Page
Loading...
