Configuring NK8000
47
Building Technologies 048_DMS_NK8000_ICC_MP4.40_A6V10062437_a_en.doc
Fire Safety & Security Products 06.2011
Fig. 34 NW8202 download status window (FTP Status OK)
Once the operation has been performed, a final status notification and instruction
window will be displayed.
Fig. 35 NW8202 final instruction window
1. Follow the instructions displayed in the final instruction window.
Note: Set Dip switch n.2 for NK822x and Dip switch n.1 for NK823x
2. Disconnect the NK82xx from the PC, and replace the cover.
3. Repeat steps 3 – 10 for the next NK82xx.
4. Reset the Service PC IP address back to the original address.
Now the NK82xx is reachable from the DMS, and is ready to receive the full con-
figuration download, which is performed from Composer.
To Next Page
Loading...
