Maintenance and diagnostics
57
Building Technologies 048_DMS_NK8000_ICC_MP4.40_A6V10062437_a_en.doc
Fire Safety & Security Products 06.2011
10.3.5 NW8204 Diagnostic functions
Reset NK
Allows you to reset an NK82xx from a remote location.
Note: This function is only available when logged in as user “admin”.
Save EEPRom on file
Stores the content of the EEProm in the file EEProm.LOG on the NK82xx flash
disk.
Set System Time
Sets the RTC (Real Time Clock) of NK82xx to the PC system time.
Note: This function is only available when logged in as user “admin”.
Set Date Time
Opens a window for setting date and time and downloads the new settings to the
RTC of NK82xx.
Note: This function is only available when logged in as user “admin”.
Fig. 42 Setting date and time
NK Vitality
Opens a window, which shows the current status of the NK82xx point image.
Fig. 43 NW8204 Vitality window
The window can be updated manually by pressing the refresh button.
You can use it to check if status changes are sent correctly from NK82xx (for ex-
ample from the tamper switch).
Note: This function is only available when logged in as user “admin”.
To Next Page
Loading...
