Maintenance and diagnostics
58
Building Technologies
048_DMS_NK8000_ICC_MP4.40_A6V10062437_a_en.doc
Fire Safety & Security Products 06.2011
Read DLL Version
Reads all subsystems configured. Displays a dialog box with a list of configured
subsystems organised by name, number, and creation date.
Read Kernel Version
Reads the version of the Linux kernel installed on NK823x.
Read NK Version
Reads the version of the installed NK82xx firmware (NK82xx.EXE).
Read NK Date Time
Reads current settings of date and time from the NK82xx RTC.
Read CPU ID
Reads the CPU ID from the DIMM-PC module on NK822x.
Read Product ID
Reads the Product ID from the NK82xx. The Product ID is used to distinguish be-
tween NK8222, NK8223, and NK8225.
Read HW Conf. ID
Reads the HW Configuration ID from the NK82xx. The HW Conf. ID is used to
check the HW Configuration from a remote location:
Serial: NH8002 (NK822x) or NKA8001-A1 (NK823x) serial port
add-on board installed
LON: NH8010 PC-104 LON add-on board installed (NK822x)
Serial + LON: NH8002 + NH8010 installed (NK822x)
Read Memory
Displays the amount of RAM (in bytes) available on the NK82xx.
Note: This functionality is not available in the NK8000 Web Server NS8210 tool.
Read Connected IP
Reads the IP address of the last host PC that was connected to the selected port.
It can be useful to find out the IP address of the host computers that have been
connecting to the NK8000.
Note: This functionality is not available in the NK8000 Web Server NS8210 tool.
Pressing this button causes the following dialog box to display:
Fig. 44 Port number request
Possible port numbers are 3001, 3002, 3003, 3004, and 4000 (CMSDL/IP)
or 47808 (BACnet).
At that point, the associated field shows the type of information found (e.g. Last IP
connected) and you can to use the field arrow controls to show the actual IP ad-
dress.
To Next Page
Loading...
