Maintenance and diagnostics
59
Building Technologies 048_DMS_NK8000_ICC_MP4.40_A6V10062437_a_en.doc
Fire Safety & Security Products 06.2011
Note: If the IP address shows ‘0000’, no PC was connected to that port.
Read HW version
Reads the NK823x hardware version (NKM8001-A1, NKM8001-A2, …). Note that
NK823x MP4.40 or later firmware is required.
Read PIC24FW Ver
Reads the PIC24 microcontroller firmware version.
Note that NK823x MP4.40 or later firmware is required.
Read WDT Status
Reads the NK823x watchdog status (enabled or disabled).
Note that NK823x MP4.40 or later firmware is required.
To Next Page
Loading...
