Hardware Installation
41
Building Technologies 048_DMS_NK8000_ICC_MP4.40_A6V10062437_a_en.doc
Fire Safety & Security Products 06.2011
Fig. 28 Wiring (2) – entrance hole indicated by arrow
6.2.2.1 NK8021 modem mounting in an NE8000 cabinet
1. Screw in the modem holder brackets using the holes provided in the back of the
cabinet.
2. Slide the modem plate into the brackets.
3. Align the holes in the sides of the modem plate with the clips on the front of the
brackets and then press down on the clips to fix the modem in place.
4. Connect the serial cable to the NK82xx.
5. Connect the power supply.
Fig. 29 NK8021 modem in NE8000 cabinet
Modem
To Next Page
Loading...
