Maintenance and diagnostics
61
Building Technologies 048_DMS_NK8000_ICC_MP4.40_A6V10062437_a_en.doc
Fire Safety & Security Products 06.2011
10.4 The NK8000 Web Server tool
As described in the beginning of section 9, the NK8000 Web Server tool provides
an NS8210 diagnostic utility in addition to the NW8204 tool. The NS8210 provides
NK82xx branch status information, and also a context command menu for each
NK82xx branch upon selection. It communicates to the NK82xxs via TCP/IP using
either CMSDL or CEI protocol.
To the end user, the NS8210 appears to function in the same way as the NW8204
tool. Both tools, however, communicate to the NK82xxs differently. Thus the
NK8000 Web Server tool provides an additional communication layer in the event
of NW8204 communication failure.
The Web Server tool is available for NS8210 only (no support for NS8011
BACnet/IP driver).
10.4.1 Launching the NK8000 Web Server
Preparation
To access the NK8000 Web Server application, you need to satisfy the following
software requirements:
Windows XP Professional, Windows 7 or Windows 2008 Server
Internet Information Services utility installed
Internet Information Services (IIS) is not pre-installed by default on certain Win-
dows versions. To install IIS, do the following:
Note: You may need a Windows CD to complete the installation.
1. Select: Startup Control Panel Add/Remove Programs Add/Remove
Windows Components.
2. Check the IIS box.
Note: This utility is already installed if box is checked. If so, skip to “Launching
NK800
0 Web Server” on p.62.
Fig. 46 Adding IIS
To Next Page
Loading...
