Siemens NK8223

Safety regulations
6
Building Technologies
048_DMS_NK8000_ICC_MP4.40_A6V10062437_a_en.doc
Fire Safety & Security Products 06.2011
3. In the resulting area on the right, select the document type (e.g. Contacts, Data
Sheet, etc).
For more information such as Siemens news and announcements, visit the STEP
Web portal at:
https://workspace.sbt.siemens.com/
content/00001123/default.aspx
Operational and safety regulations
i
Before beginning work on the system you must have read and understood the
related documents, in particular the "Safety regulations" section.
Liability disclaimer for damage or injuries
Before products are delivered, they are tested to ensure they function correctly
when used properly. Siemens disclaims all liability for damage or injuries caused
by the incorrect application of the instructions, or the disregard of danger adviso-
ries. This disclaimer applies in particular to personal injuries or damage caused by:
 Improper and/or incorrect use;
 Disregard of safety instructions in the documentation or on the product;
 Poor maintenance or a lack of maintenance.
We have checked the contents of this manual for agreement with the hardware and
software described. Since deviations cannot be precluded entirely, we cannot
guarantee full agreement. However, the data in this manual are reviewed regularly
and any necessary corrections are included in subsequent editions. Suggestions
for improvement are welcome.
Modification index
Current version Date Notes
A6V10062437_a_en 06.2011 Update for NK8000 MP4.40:
– Improved NK8232 and NK8235 functions: BACnet and
I
2
C I/O now supported)
– New EEProm log definitions
– Enhanced connectivity for:
- FS20/FS720 for interactions and network separation
- FS20/FS720 Modbus Gateway
– Enhanced Web diagnostic tool.
– New Kernel Update section
A6V10062437_a_en 06.2010 Update for NK8000 MP4.30
– New NK8231 CEI adapter, improved NK8232 and
NK8235 functions (BACnet and I
2
C I/O still not sup-
ported)
– Network tunnelling for remote CS6 configuration on
NK822x
A6V10062437_a_en 12.2009 Update for NK8000 MP4.20-01
– NK8232 and NK8235 released with some limitations
A6V10062437_a_en 06.2009 Update for NK8000 MP4.20
– NK8232 and NK8235 (announced)
– IIS security and Lockdown tool
A6V10062437_a_en 06.2008 Update for NK8000 MP4.15
– New DF8000 I/O module support with improved CMX-DL
protocol
A6V10062437_a_en 06.2007 Update for NK8000 MP4.10
– NK8225 SIGMASYS / D100 support for BACnet protocol
– Modem support: Analog and GSM
– Dial-ups as primary or secondary connection
– 500 NK82xx connections
007798_g_en 06.2006 Update for NK8000 MP3.20
– NK8225 CNAP and BACnet connectivity
– 100 NK82xx connections
– Updated NK8222/NK223 Baseboard