Configuration
Configuring IP settings via NW8202
7
61
Building Technologies
A6V10062437_a_en
Fire Safety & Security Products 30.06.2013
NW8202 final instruction window
10. Follow the instructions displayed in the final instruction window.
Note: Set dip switch n.2 for NK822x and dip switch n.1 for NK823x.
11. Disconnect the NK82xx from the PC, and replace the cover.
12. Repeat steps 3–10 for the next NK82xx.
13. Reset the Service PC IP address back to the original address.
Now the NK82xx is reachable from the DMS, and is ready to receive the full
configuration download, which is performed from Composer.
To Next Page
Loading...
