Siemens NK8235

Hardware installation
5
NE8000 cabinets
34
Building Technologies A6V10062437_a_en
Fire Safety & Security Products 30.06.2013
5.1.1 NE8000 hardware requirements
Environmental requirements
The cabinets should always be installed in a clean and safe environment, away from
dust, high temperature and humidity, vibrations and impacts. Conditions and power
supply should match the specific requirements given in the Technical data section of
the NK8000 datasheet.
NE8001 power requirements.
Item Power supply requirement
Input voltage 100-240 Vac, 50-60Hz
Input current 2A
Note: A switch-box including a bipolar cut-out (phase + neutral) is required in the
electrical installation.
5.1.2 NE8000 hardware installation
The cabinet is typically wall-mounted. A proper support must be provided for the
maximum weight (see Technical data on the NK8000 datasheet). Four supporting
screws or hooks (min. 10 mm) are required.
WARNING
Supporting wall must not be composed of inflammable material.
360 mm
415 mm
Cabinet installation