Maintenance and diagnostics
9
The NK8000 Web Server tool
80
Building Technologies A6V10062437_a_en
Fire Safety & Security Products 30.06.2013
Adding IIS
3. Select Details.
4. Select the FTP Server check box, then select OK.
5. Select Next.
Note: You may be able to Browse to select where you want to store the utility.
6. Select Finish.
If you install IIS after installing MM8000 / MK8000, you must perform the following
steps to reset the registry keys:
1. Press Start > Run to open the Run windows.
2. Browse to the folder:
<installation folder> > Utilities > Bat
3. Select NK8210ConfigurationTool.exe.
4. In the Open field of the Run window, add the parameter –i at the very end.
5. The final command should look like: … NK8210ConfigurationTool.exe -i
6. Press OK.
7. Reboot the PC.
To Next Page
Loading...
