NW8204 window (installed GUI)
2. Insert the NK IP Address.
Note: Inserting an incorrect IP address causes the following window to display.
If you are notified by this message, click OK and enter again the IP Address. If
you want to enter the NK8237 default IP address 192.168.9.41, you can use
the menu Set Default IP Address instead of manually enter it.
3. Select Open Connection.
Note: You can select the FTP Mode: Active (default) or Passive (needed if a
firewall is active in the PC).
NW8204 opens an FTP session on the NK8237 and lists all files available
on the NK8237 flash disk.
To Next Page
Loading...
