Read the NK8237 firewall status: Enabled, Disabled.
Read Routing Status
Read the NK8237 routing status: Enabled, Disabled.
11.2.4 Uploading diagnostic files
Diagnostic file purposes
The purpose of these files is to record messages of what occurred to NK8237 to
make it easier to determine any issues, or if something important happened.
Diagnostic file description
DIAGNO.LOG
This file is always present and contains detailed technical information about the
behaviour of the software application running on the NK8237. For example, if it was
not possible to open an internal queue during the initialization phase, that message
is saved to this file.
The information in this file is not meant to be used by field engineers on site. In
case of technical problems, the DIAGNO.LOG file can be sent to the technical
support for further investigations.
EEProm.LOG
You create this file by clicking the Save EEProm on File button. This file contains
information about the NK8237 hardware status stored on the EEPROM. For
example, if it was not possible to use the serial interface on COM3 because the
serial add-on board is broken, that message is saved to the EEPROM.
To Next Page
Loading...
