Siemens OpenAir GMA 1 Series - Page 36

36/44
Siem ens GMA..1 actuators with spring return CM2Z4614en
Building Technologies 2018-01-11
Output signal (wires 9-2)
Output voltage U
Max. output current
Protected against faulty wiring
DC 0...10 V
DC ° 1 mA
max. AC 24 V/DC 24 V
Change of resistance (wires P1-P2)
Load
Max. sliding contact current
Permissible voltage at potentiometer (SELV/PELV)
Insulation resistance between potentiometer and housing
0...1000 ς
< 1 W
< 10 mA
max. AC 24 V/DC 24 V
AC 500 V
AC power supply
Switching voltage
Nominal current res./ind.
Life: 6 A res., 2 A ind.
without load
DC power supply
Switching voltage
Nominal current
Electric strength auxiliary switch against housing
Switching range for auxiliary switches
Setting increments
Switching hysteresis
Factory switch setting
Switch A
Switch B
AC 24...230 V
6 A / 2 A
10
4
cycles
10
6
cycles
DC 12..30 V
DC 2 A
AC 4 kV
5°...90°
5°
2°
5°
85°
Cross section of prewired connection cables
Standard cable length
Permissible length for signal lines (non-communicative types)
0.75 mm
2
0.9 m
300 m (see chapter 6)
Degree of protection as per EN 60 529 IP 54
Insulation class
AC/DC 24 V, Feedback potentiometer
AC 230 V, Auxiliary switch
as per EN 60 730
lll
II
Operation
Climatic conditions
Mounting location
Temperature
Humidity (non-condensing)
Transport
Climatic conditions
Temperature
Humidity (non-condensing)
Mechanical conditions
IEC 60 721-3-3
class 3K5
interior, weather-protected
,32....+55 °C
< 95 % r.h.
IEC 60 721-3-2
class 2K3
,32...+70 °C
< 95 % r.h.
class 2M3
Product safety
Automatic electrical controls for household and similar use
Electromagnetic compatibility
(Application)
EU Conformity (CE)
RCM Conformity
EAC Conformity
UL, cUL
Product environmental declaration
2)
EN 60 730-2-14, (Type 1)
For residential, commercial and industrial
environments
8000081792
1)
8000081793
1)
Eurasia conformity for all GMA.. variants
UL 873 http://ul.com/database
CE1E4614en
1)
and A6V101083254en
1)
Actuator W x H x D (see "Dimensions")
Damper shaft
Round
Square
Min. length
Max. shaft hardness
81 x 192 x 63 mm
6.4...20.5 mm
6.4...13 mm
20 mm
< 400 HV
Weight without packaging
GMA1..1
GMA321.1, 326.1
GMA161.1E/MO
1.2 kg
1.3 kg
1.4 kg
1)
The documents can be downloaded from http://siemens.com/bt/download
2)
The product environmental declaration contains data on environmentally compatible product design
and assessments (RoHS compliance, materials composition, packaging, environmental benefit,
disposal).
Outputs
Position indicator
for GMA16..1
Feedback potentiometer
for GMA132.1
Auxiliary switch
for GMA..6.1, GMA164.1,
Connection cables
Degree of protection of housing
Protection class
Environmental conditions
Standards and directives
Dimensions
Weight