Siemens QAA75 series - Page 70

3
Handling
AVS37.390...
70
Siemens Operator / Room / Auxiliary devices CE1U2358en_04
Building Technologies 2014-09-26
Press the +/- buttons to directly lower or increase the Comfort setpoint .
For the Reduced setpoint
l Press OK.
l Select the operating line for the “Reduced setpoint”.
Each time you make a readjustment, wait at least 2 hours, allowing the room
temperature to adapt.
Press the + / - buttons to increase or decrease the nominal DHW setpoint.
Adjusting the room
temperature setpoint
Set nominal DHW
setpoint