73
Siemens Operator / Room / Auxiliary devices CE1U2358en_04
Building Technologies 2014-09-26
3.3.2 Programming
Settings that cannot be made directly with the help of operating elements are made
through programming. For that, the respective setting buttons are used as follows:
NOTICE
When pressing the ESC button, you go one step back; adjusted values will
not be adopted
● If no setting is made for 8 minutes, the display returns automatically to the
basic display
● Operating lines may be hidden, depending on the type of controller, the
configuration made and the user level
Operation Display example Description
1 Basic display.
If the basic display is not shown, press the ESC button
to return to it.
Press OK.
2
The display shows the first operating line, alternating
with the value.
Press the arrow button until you reach operating line
“Hours / minutes” (e.g. 50).
Press the OK button to confirm.
Setting principle
Example "Setting the
time of day"
To Next Page
Loading...
Need help?
General
