4/12
Building Technologies CC1N7719en
17.07.2018
Standards and certificates
Note!
Only in connection with burner controls!
EAC Conformity mark (Eurasian Conformity mark)
ISO 9001:2015
ISO 14001:2015
OHSAS 18001:2007
China RoHS
Hazardous substances table:
http://www.siemens.com/download?A6V10883536
For use in the U.S. / Canada, the flame detectors carry the marks.
Service notes
To clean the detector’s lens, use a soft, clean cloth (free from oil and solvents).
Disposal notes
The flame detector contains electrical and electronic components and must not be
disposed of together with domestic waste.
Local and currently valid legislation must be observed.
Mechanical design
The QRI... has an impact-proof housing made of black plastic. The lens is fitted in a
dust-tight position.
The QRI... can be secured to the burner within its adjusting range, using the clamp and
the flange provided.
The 3-core connecting cable is ready connected to the QRI... and features cable strain
relief.
Depending on the type of burner construction, there are flame detectors for frontal or
lateral illumination available.
Type summary
Article no. Type reference Illumination Cable length
(L)
Cable end Accessories
BPZ:QRI2A2.B180B QRI2A2.B180B Frontal 180 cm Stripped ---
BPZ:QRI2B2.B180B QRI2B2.B180B Lateral 180 cm Stripped ---
BPZ:QRI2B2.B180B1 QRI2B2.B180B1 Lateral 180 cm Stripped 4 241 8898 0
Flange straight
and clamp
When ordering, please give the complete type reference according to Type summary.
To Next Page
Loading...
Need help?
General
