Do you have a question about the Siemens OH720 and is the answer not in the manual?
Brand | Siemens |
---|---|
Model | OH720 |
Category | Security Sensors |
Language | English |
Essential safety notices for protecting people and property during system operation.
Covers national standards, electrical installation safety, and mounting/maintenance safety practices.
Introduces the automatic fire detectors covered and their general characteristics.
Describes the structure and function of various point detectors.
Details the operation, components, and benefits of the multi-sensor smoke detector.
Explains the structure and function of the wide-spectrum optical smoke detector.
Covers the structure and function of heat detectors, highlighting key differences.
Explains how parameter sets influence detection behavior and are programmed.
Defines the danger levels (0-3) transmitted by detectors to the control panel.
Describes the diagnosis levels indicating the detector's operational status and potential issues.
Details the function of the line separator in isolating defective parts of the C-NET detector line.
Details how to connect external alarm indicators to detectors and their triggering.
Explains how to set detectors to test mode for functional testing using gas or hot air.
Details the installation of the FDBH291 heating unit to prevent icing and condensation.
Explains how to connect the detector heating unit to the control panel and its power supply.
Describes the process of commissioning devices via the control panel on a C-NET.
Recommends regular performance checks of detectors and replacement intervals.
Details methods for testing detectors using test gas or a hot air fan.
Lists detailed technical data for the OH720 multi-sensor smoke detector, including electrical and line data.
Lists detailed technical data for the OP720 smoke detector, including electrical and line data.
Lists detailed technical data for HI720 and HI722 heat detectors, including electrical and device characteristics.