Siemens OH720 - Detector Base DB720; Sounder Base DBS720; Designation Plate FDBZ291; Detector Base Seal RS720

2BStructure and function
20BAccessories
3
27 |
64
Building Technologies
A6V10212047_m_en_--
Fire Safety
2015-05-04
3.5.3 Detector base DB720
● For the installation of point detectors
● For the recess-mounted cable entry
● For surface-mounted cable entry, up to 8 mm cable
diameter
● Compatible with:
● Order no.: S54319-F4-A1
See also
 Detector base DB72x [➙ 36]
3.5.4 Sounder base DBS720
● For acoustic alarming in the case of an event
● Thanks to the loop contacts, the detector line is not
interrupted when there is no point detector installed in the
sounder base.
● For the C-NET detector line
● For the recess-mounted cable entry
● For surface-mounted cable entry, up to 8 mm cable
diameter
● Compatible with:
● You will find more information in document A6V10218037
● Order no.: S54319-F5-A1
See also
 Sounder base DBS720 [➙ 38]
3.5.5 Designation plate FDBZ291
● To identify the location
● Compatible with:
● Order no. A5Q00002621
See also
 Designation plate FDBZ291 [➙ 45]
3.5.6 Detector base seal RS720
● For installation in wet rooms
● Protection category IP42
● Compatible with:
● Order no.: S54319-F8-A1
See also
 Detector base seal RS720 [➙ 39]