CC1N7713en
30.08.2010
Building Technologies Division
Industry Sector
7
713
Photocell Detectors
RAR...
The photocell detectors are designed for use with burner controls, for the super-
vision of yellow-flame oil flames.
They are used especially in connection with burner controls for the control and
supervision of large-capacity burners.
The RAR... and this Data Sheet are intended for use by OEMs which integrate the
flame detectors in their products!
Use
The RAR... flame detectors are used for the supervision of yellow-burning oil flames.
They are designed for use with the following types of burner controls: LAL..., LAE1...,
LOK16... and LAE10...
To Next Page
Need help?
General
