Siemens REV17 Series User Manual

CE1N2203en
24.04.2008
Building Technologies
s
2
203
Weekday / weekend
room temperature controller
REV17..
Heating applications
• Mains-independent, battery-operated room temperature controller featuring
user-friendly operation, easy-to-read display and large numbers
• Self-learning two-position controller with PID response (patented)
• Operating mode selection:
- 7-day (weekday / weekend) automatic mode.
with max. 3 heating phases
- Continuous comfort mode
- Continuous energy saving mode
- Frost protection
- Exception day (24 hour operation) with max. 3 heating phases
• A separate temperature setpoint can be entered in automatic mode and for
the exception day for each heating phase
• To control a heating zone
Use
Room temperature control in:
• Single-family and vacation homes
• Apartments and offices
• Individual rooms and professional office facilities
• Commercially used spaces
Control for the following equipment:
• Magnetic valves of an instantaneous water heater
• Magnetic valves of an atmospheric gas burner
• Forced draught gas and oil burners
• Electrothermal actuators
• Circulating pumps in heating systems
• Electric direct heating
• Fans of electric storage heaters
• Zone valves (normally open or normally closed)

Siemens REV17 Series Specifications

General

Brand	Siemens
Model	REV17 Series
Category	Thermostat
Language	English

Summary

Weekday/Weekend Room Temperature Controller REV17

Heating Applications Overview

Features mains-independent, battery-operated controller with PID response and 7-day automatic mode for heating.

Product Functionality and Design

Core Controller Features

PID control, 2-point control, 7-day time switch, remote, override, holiday, party, and frost protection modes.

Product Variants and Ordering

Display and Operating Elements Details

Operating Mode Selection Function

Allows selection of automatic, exception day, continuous comfort, energy saving, or frost protection modes.

Program Selection Slider Function

Selects time, day blocks, and heating phases (P1-P6) for programming.

Operating Modes Configuration

Time Switch Program Setup

Configures start/end times for heating phases and comfort/energy saving temperatures.

Continuous Mode Options

Offers continuous comfort, energy saving, or frost protection modes.

Setpoint Configuration and Range

Adjustable setpoints for weekly/24-hour modes within a specified range.

Holidays, Absences, and Remote Control

Setting Holidays and Absences

Sets start date, temperature, and end date for absence or holiday mode.

Remote Control Activation Method

Uses remote units to activate remote control temperature setpoint via terminals T1/T2.

Setting Remote Control Temperature

Technical Features and DIP Switch Configuration

DIP Switch Functions Overview

Controls sensor calibration, setpoint limitation, temperature display units, PID settings, and pump run.

Control Behavior Settings (DIP Switches 4&5)

Configures PID self-learning, PID 6, PID 12, or 2-point control.

DIP Switch Reset Procedure

Expert Level Access and Functional Verification

Accessing Expert Settings

Expert Code List Details

Functional Check Procedures

Reset and Installation Procedures

Resetting User-Defined Settings

Resetting All Settings (User & Expert)

Mounting and Installation Guidelines

Commissioning and Wiring Steps

Technical Data and Specifications

General Unit Specifications

Connection Diagrams and Application Examples

Terminal Connections Overview

Explains connections for controller terminals: L, L1, L2, N, S1, T1, T2, M1, Y1.

System Application Diagrams