Siemens Reyrolle 7SR5 - 3 Device Functionality

[sc_7SR5_TimeZone, 1, --_--]
i
i
NOTE
The offset time zone for time synchronization is with reference to UTC and not the relays local time.
i
i
NOTE
If a time zone for time synchronization is already preset for the communication protocol, for example,
DNP3 or IEC 60870-5-103, the time zone of the time source must be identical.
i
i
NOTE
If a time zone for time synchronization is from SNTP the time zone of the time source from the serial
protocol must be identical as the offset and daylight saving rules will not be applied by the device.
Basic Structure of the Device Functionality
2.5 Real Time Clock
Reyrolle 7SR5, Overcurrent Protection Device, Device Manual 39
C53000-G7040-C014-1, Edition 11.2019