Siemens RUGGEDCOM RS900

Certification
6.1.5FDA/CDRH
6.1.5 FDA/CDRH
This device meets the requirements of the following U.S. Food and Drug
Administration (FDA) standard:
• Title 21 Code of Federal Regulations (CFR) – Chapter I – Sub-chapter J –
Radiological Health
6.1.6 ISED
This device is declared by Siemens AG to meet the requirements of the following
ISED (Innovation Science and Economic Development Canada) standard:
• CAN ICES-3 (A)/NMB-3 (A)
6.1.7 ISO
This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
• ISO 9001:2015
Quality management systems – Requirements
6.1.8 TÜV SÜD
This device is certified by TÜV SÜD to meet the requirements of the following
standards:
• CAN/CSA-C22.2 NO. 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National standard, with UL 62368-1)
• UL 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
6.1.9 ACMA
This device meets the requirements of the following Australian Communications and
Media Authority (ACMA) standards under certificate ABN 98 004 347 880:
• Radiocommunications (Compliance Labelling – Devices) Notice 2014 made
under Section 182 of the Radiocommunications Act 1992
• Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008
made under Section 182 of the Radiocommunications Act 1992
32
RUGGEDCOM RS900
Installation Manual, 12/2020, C79000-G8976-1024-12