Siemens RUGGEDCOM RS900G

Certification
6.1.8RoHS
• Telecommunications Labelling (Customer Equipment and Customer Cabling) No-
tice 2001 made under Section 407 of the Telecommunication Act 1997
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
A copy of the Declaration of Conformity is available via Siemens Industry Online Sup-
port at https://support.industry.siemens.com/cs/ww/en/view/89855782.
6.1.8 RoHS
This device is declared by Siemens AG to meet the requirements of the following Ro-
HS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Informa-
tion Products
A copy of the Material Declaration is available online at https://support.indus-
try.siemens.com/cs/ww/en/view/109738831.
6.1.9 Other Approvals
This device meets the requirements of the following additional standards:
• EN50121-4
Railway applications – Electromagnetic Compatibility – Emission and Immunity
of the Signaling and Telecommunications Apparatus
6.2 EMC and Environmental Type Tests
The RUGGEDCOM RS900G has passed the following Electromagnetic Compatibility
(EMC) and environmental tests.
EMC Type Tests
Test Description Test Levels Severi-
ty Levels
Enclosure
Contact
± 8 kV 4IEC
61000-4-2
ESD
Enclosure Air ± 15 kV 4
30
RUGGEDCOM RS900G
Installation Manual, 06/2020, C79000-G8976-1025-07