Siemens RVD110 - Page 87

87/94
Siemens Building Technologies Basic Documentation RVD110, RVD130 CE1P2381E
HVAC Products Alphabetical list of operating lines 27.05.2004
Alphabetical list of operating lines
Function, setting, display Operating line Page
A
Actuator running time 91 44
Actuator running time, actuator Y1* 81 43
Actuator running time, d.h.w. mixing valve Y7 121 56
Actuator Y5 closing time, d.h.w. mixing valve 112 55
Actuator Y5 opening time, d.h.w. mixing valve 111 55
Adaptation of heating curve 66 32
Address and identification of device at terminal A6 145 61
B
Building structure 62 32
C
Circulating pump operation during legionella function 128 52
Contact status at terminal H5 146 61
Current nominal room temperature setpoint 1 24
D
D.h.w reduced setpoint 42 27
D.h.w. normal setpoint 41 27
D.h.w. priority 106 47
D.h.w. switching differential 103 46
D.h.w. temperature 26 28
Daily forced d.h.w. heating at the start of release period 1 162 63
Date 15 26
Derivative action time d.h.w. control 115 55
Display of active limitations 143 61
Display of faults 50 29
Dwelling time at legionella setpoint 127 52
F
Flow switch / circulating pump present (offsetting heat losses) 54 30
Flow temperature heating circuit 27 28
Frost protection / holiday mode setpoint 3 24
Frost protection for the plant 73 32
H
Heat gains 69 32
Heating curve slope 5 24
Heating limit (ECO) 61 32
Heating period 1 end 8 24
Heating period 1 start 7 24
Heating period 2 end 10 24
Heating period 2 start 9 24
Heating period 3 end 12 24
Heating period 3 start 11 24
I
Idle heat function 163 63
Integral action time 93 44