Siemens RVD110 - Page 88

Siemens Building Technologies Basic Documentation RVD110, RVD130 CE1P2381E
HVAC Products Alphabetical list of operating lines 27.05.2004
Integral action time d.h.w. control 114 55
Integral action time d.h.w. control Y7 123 56
Integral action time of control, actuator Y1* 83 43
Integral action time, primary return temperature limitations 155 63
L
Legionella function 104 52
Load limit when flow switch is actuated 124 56
Locking on the hardware side 191 63
M
Max. d.h.w. temperature setpoint 117 55
Max. limitation of flow temperature 85 43
Max. limitation of flow temperature 95 44
Max. limitation of primary return temperature slope, start of shifting limitation 153 63
Max. limitation of primary return temperature, constant value 151 63
Max. limitation of primary return temperature, slope 152 63
Max. limitation of room temperature 74 32
Max. limitation of temperature differential 156 63
Max. setpoint of return temperature with d.h.w. heating 154 63
Max. setpoint of the return temperature during d.h.w. heating at the legionella setpoint 157 63
Max. time d.h.w. heating 109 47
Maximum setpoint of the return temperature with d.h.w. heating at the legionella setpoint 157 52
Min. limitation of flow temperature 86 43
Min. limitation of flow temperature 96 44
O
Outside temperature 25 28
Overrun time charging pump Q3 107 47
Overrun time charging pump Q7 108 47
Overrun time heating circuit pump 72 32
P
Parallel displacement of heating curve 71 32
P-band 92 44
P-band d.h.w. control 113 55
P-band d.h.w. control Y7 122 56
P-band of control, actuator Y1* 82 43
Plant type 51 30
Pump kick 56 30
Q
Quick setback with room temperature sensor 63 32
R
Raising the reduced room temperature setpoint 161 63
Reduced room temperature setpoint 2 24
Relay test 142 61
Release of circulating pump (RVD130 only) 102 46
Release of d.h.w. heating 101 46
Release period 1 end 19 27
Release period 1 start 18 27
Release period 2 end 21 27
Release period 2 start 20 27