PHOTO 2.18 ASSEMBLE S35i – STEP 3
STEP 4:
Remove old IMEI label from the old housing using a hair-dryer for re-use of the IMEI label or
paste the new IMEI label supplied for control board replacement. Insert the battery and put back
the battery cover. Ready for testing.
PHOTO 2.19 ASSEMBLE S35i – STEP 4
D o n o t p l a c e t h e p h o n e o n t h e t a b l e
t o c l o s e u p t h e h o u s i n g a s t h e
A n t e n n a m a y b e d a m a g e .
ALL CATCHES MUST BE ENGAGED COMPLETELY!
Mobile Software Programming
Model before C25 and S35i, software used for the mobile are similar except for their differences
in the language group. Customer specific values (e.g. ringing tones etc) are seldom, but there
were some, were included in the common mobile software.
To Next Page
Loading...
Need help?
General
