SOFTWARE IS A DOS-BASED PROGRAM, IT IS
ADVISABLE TO DO THE SOFTWARE UPGRADE IN DOS
ENVIRONMENT.
Languague Groups
There are over 20 languages for the S35i series in total. These languages are divided into
groups as follows
SLG 1
English, german, french, italian, dutch, swedish, finnish,
norwegian, danish
SLG 2
English, swedish, finnish, norwegian, danish, german, french,
italian, dutch
SLG 3
English, french, italian, spanish, portuguese, german, catalan,
dutch
SLG 4
English, german, hungarian, polish, russian, bulgarian, czech,
slovakian
SLG 5
English, french, italian, arabic, greek, turkish, hebrew, bahasa,
malaysia, bahasa indonesia
SLG 6
English 2, chinese simplified, chinese traditional (For 3568i)
Note: Tegic T9 is supported in bold
TABLE 2.2 SOFTWARE LANGUAGE GROUPS.
T h i s i n f o r m a t i o n i s s u b j e c t t o c h a n g e !
Contact your Service Manager for the order number of the
right version of mobile software for your market.
The mobile software file is named using this convention:
e.g. S35_0501 Version = 05; Language Group = 1
S35_0508 Version = 05; Language Group = 8.
This executable file needs an definition or init file, named SWUP.INI, to define the message
language preferences and the hardware communication port set up.
The content of this file consists of the following text:
Where x is the number that corresponds to the serial port that is used, either 1, 2 or 3.
S35_(Version)(LG).EXE
Language=English
COM=x
To Next Page
Loading...
