SIEMENS PTE LTD
S65 Level 2 Service Manual
Copyright © Siemens Pte Ltd. Siemens Technical Support Centre
All Rights Reserved
ICM MP CCQ SLI RHQ Page 20 of 35 Internal Use Only
9.1 Mobile Software Updating
The software of the mobile, R65 series is loaded from a PC directly. Hardware
interconnection between the mobile and the PC is shown in Figure 1. Because of the new
type of external connector used in X55 series (Slim-Lumberg type) an additional adaptor
cable between mobile and boot adaptor is required. In Table 1 the hardware
requirements are listed.
If you use the battery dummy, make sure that the power supply voltage is correctly
adjusted.
Description Part No.
Bootadapter 2000 incl. AC-Adapter, serial
cable and mobile connection cable
L36880-N9241-A200
IBM Compatible PC – Pentium -
Adapter cable – Slim Lumberg to Old F30032-P226-A1
Dongle (for mapping only)
F30032-P28-A1
TABLE 1. EQUIPMENT LIST FOR SOFTWARE PROGRAMMING
Click tack to see presentation for SW update concept
To Next Page
Loading...
