SIEMENS PTE LTD
S65 Level 2 Service Manual
Copyright © Siemens Pte Ltd. Siemens Technical Support Centre
All Rights Reserved
ICM MP CCQ SLI RHQ Page 27 of 35 Internal Use Only
Printing IMEI label
The module “Print IMEI label” offers the possibility to re-print IMEI labels for mobiles.
You are able to print 1 label in just one step.
To prevent that misaligned labels are being printed, the setting "Print test labels = " is
activated as default. After having printed a well-aligned test label you can uncheck the
setting and print the correct label.
Hint:
For correct printing of IMEI labels you must have a Zebra – label printer with special
material that fits for label printing. This printer has to be connected to local LPT1
printer port (also see Installation of IMPRINT) and MUST feature a printing resolution
of 300dpi.
To Next Page
Loading...
