Setup40
© Siemens AG 2003, C:\Daten_itl\Siemens\DTP-Satz\Produkte\S75_Minos_1\out-
left page (40) of S75 SUG en, A31008-H2500-A1-1-7619 (14.09.2005, 08:53)
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050822
• Last srch.result
List of the last devices found.
My BT name
The phone is given a name (max.
20 characters) – this is the name the
partner sees. If no name is given, the
phone uses the non-changeable de-
vice address.
Visib.to others
Make settings to specify how your
phone should "act" when in contact
with other BT devices. This means (if
"visible"), for example, that the de-
vice address or the BT name of your
phone is shown to other BT devices if
they request this in order to receive
or send data.
• Not visible
Your phone is not "visible" to other
BT devices. Known devices such as
the Bluetooth Headset/Car Kit con-
tinue operating.
• Auto mode
Your phone is "visible" to other BT
devices for five minutes. You will
then be asked if "visibility" should
continue.
• Always visible
Your phone is always "visible" to oth-
er BT devices. These devices can cre-
ate a connection to your phone and
be added to the known device list if
necessary.
BT audiostream
When a Bluetooth headset is used,
all audio signals are transmitted to
this exclusively.
Configura. set
Default setting and activation of the
connection profiles for data trans-
mission. The phone default setting
varies from service provider to
service provider. Consult your serv-
ice provider or go to this address on
the Internet for more information
www.siemens.com/
mobilephonescustomercare
Fax/data
Send voice/fax b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec. fax/data
b
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed. Now start the commu-
nication program in your PC to re-
ceive the fax/data.
Shown in the display
¨
Bluetooth activated.
© Bluetooth visible to others.
To Next Page
Loading...
