Siemens S75 - Getting Started

Getting started8
© Siemens AG 2003, C:\Daten_itl\Siemens\DTP-Satz\Produkte\S75_Minos_1\out-
left page (8) of S75 SUG en, A31008-H2500-A1-1-7619 (14.09.2005, 08:53)
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050822
Getting started
Your phone's display is covered with
a protective film. Remove this before
using the phone.
Inserting SIM card/
battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Place the SIM card in front of the
slot with the contacts facing
downwards. Then push the
SIM card fully into the holder
using gentle pressure
1. Ensure
that the chamfered corner is in
the correct position.
• Insert the battery sideways into
the phone
2, then press it down-
wards
3 until it engages.
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
In rare cases
static discharge
can cause
temporary
discoloration in the
display. However,
this will disappear
within approx.
10 minutes.
1
3
2