Siemens SANTIS-ab User Manual

10
The settings are executed as follows. See also flow chart on next
page.
1. Hook off and wait for dial tone
2. Dial
∗∗
→ The dial tone is switched off
3. Dial the command number and parameter value according to
the tables in chapter 5.
4. Dial
#
→ If the parameter has been programmed
successfully, a permanent tone is switched on.
Otherwise a busy tone will be switched on.
5. Proceed with step 3. if necessary for setting other parameters
or hook on.

Siemens SANTIS-ab Specifications

General

Brand	Siemens
Model	SANTIS-ab
Category	Network Hardware
Language	English