9
If the configuration access (CA) is restricted (can be set and
changed by authorized persons, e.g. telecom staff), the
configuration for the a/b1-interface can only be done via the
a/b1-interface and vice versa for the a/b2-interface.
This mode is called NT+2ab/CA restr.
If the Pairgain mode is selected, the configuration access is
automatically restricted, i.e. the configuration for the a/b1-
interface can only be done via the a/b1-interface and vice
versa for the a/b2-interface.
To Next Page
Loading...
