Siemens SCALANCE W760 - Factory Port Settings; Protocol Authentication

● Factory setting
– Open
The factory setting of the port is "Open".
– Closed
The factory setting of the port is "Closed".
● Authentication
Specifies whether or not the protocol is authenticated.
Protocol Port number Port status Factory setting of the
port
Authentication
SSH TCP/22 Open (when config‐
ured)
Open Yes
TELNET TCP/23 Open (when config‐
ured)
Open Yes
HTTP TCP/80 Open (when config‐
ured)
Open Yes
HTTPS TCP/443 Open (when config‐
ured)
Open Yes
SNTP
NTP
UDP/123 Open (when config‐
ured)
Closed No
SNMP UDP/161 Open (when config‐
ured)
Open Yes
PROFINET UDP/34964,
UDP/49154,
49155
Open Open No
Syslog UDP/514 Open (when config‐
ured)
Open No
EtherNet/IP TCP/44818,
UDP/
2222,44818
Open (when config‐
ured)
Open No
DHCP UDP/67,68 Open (when config‐
ured)
Closed No
RADIUS UDP/
1812,1813
Open (when config‐
ured)
Closed No
TFTP UDP/69 Open (when config‐
ured)
Closed No
Security recommendations
SCALANCE W760/W720
10 Operating Instructions, 09/2017, C79000-G8976-C322-08