Configuration Using Web Based Management and the Command Line Interface
112
ription Comment Command Desc
name [system name]
Assigns a value to the sysName MIB
variable.
Maximum of 255
characters. If you want
to use the name in WDS
or redundancy, the
maximum length is 32
characters.
location [loc
characters.
ation]
Assigns a value to the sysLocation MIB Maximum of 255
variable.
contact [nam ]
he sysContact MIB Maximum of 255
characters.
e
Assigns a value to t
variable.
ping [[-c N] | [ s]] <
er) for the number (N) of ICMPs
stop ICMP frames.
Telnet only
- IP>
For connection test to partner.
-c (count
and -s (stop) to
password [a
[password]
dmin|user]
Specifies a password for access to the
SCALANCE W78x.
Maximum of 31
characters.
6.2.2 IP
Configuration
Here, you decide whether you will use a DHCP server or whether you want to
. You can also set the IP
address of a router and the default TTL. The TTL (time to live) parameter specifies
passed through by a data packet before it is
discarded.
t
an
Settings Menu Command
assign a fixed IP address to the SCALANCE W78x
the maximum number of routers
No e
If you use a Radius server for authentication, this must the accessible over the
m agement VLAN.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
To Next Page
Loading...
