Siemens SCALANCE W788-2PRO - Data Rates Submenu Command (Access Point Mode Only)

Configuration Using Web Based Management and the Command Line Interface
C79000-G8976-C184-07
160
and (access point mode only)
Variable S
r sh
(8 etc
access point will t nsmission rates for communication
w .
he "Basic Rate“ parameter specifies that a client must be capable of this data rate
ble to connect to the access point.
6.3.6 Data Rates Submenu Comm
etting of the Transmission Rates
F om the table
02.11b, g, a
owing all available data rates for the current WLAN mode
.), you can select any combination of these data rates. The
hen use only the selected tra
ith the clients
T
to be a
Figure 6-2 "edit" Screenshot:
Operating Instructions SCALANCE W78x