Configuration Using Web Based Management and the Command Line Interface
155
Description Comment Command
swretry [E|D]
Enables / disables the software retry
functionality.
swretno [0 ... 15]
Specifies the number of software
retries.
hwretno [0 ... 15]
Specifies the number of hardware
retries.
preamb [E|
802.11b are supported
(higher performance).
D]
Enables / disables the short
preamble.
When this function is
enabled, higher data rates
according to IEEE
antenna [A|B|SA|SB|D]
Specifies which antennas are used:
A Only antenna A
B Only antenna B
SA Antenna A transmits
Anten
SB Antenna B transmits
With the IWLAN/PB Link
with one antenna socket,
the default (Antenna A)
must not be changed.
na B receives
Antenna A receives
D The best of both antennas
(diversity)
noise [A|L|M|H]
ter
A Automatic
L Low
M Medium
A strong noise filter allows
a more stable connection
but also a shorter
transmission range.
Set the noise fil
H High
wmm [E|D]
Enables / disables frame
transmission taking into account
priority.
antgain [0...30
Set antenna gain in dBi
anttype [0.
see the list, enter
"anttype ?".
..n]
Set antenna type:
To
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
To Next Page
Loading...
