Siemens SCALANCE W788-2PRO - Page 172

Configuration Using Web Based Management and the Command Line Interface
C79000-G8976-C184-07
172
x terface Synta of the Command Line In
CLI\SECURITY\BASIC\WLAN1>VAP1
ond wireless adapter (if it exists) or for the sec
CLI\SECURITY\BASIC\WLAN2>VAP1
Command Description Comment
authent
[0|1|2|3|
Specifies the authentication type.
1 Shared Key
2 WPA (RADIUS)
WPA-PSK
802.1x (RADIUS)
With the authentication
and 8
WPA-PSK & WPA2-PSK
must be the same.
4|5|6|7|8]
For the parameter n, enter a number
between 0 and 4 for the type
authentication:
0 Open System
types 7 (WPA-Auto)
(WPA-Auto-PSK), the
encryption method of
WPA and WPA2 or
3
4
5 WPA2
6 WPA2-PSK
7 WPA-Auto
8 WPA-Auto-PSK
encrypt [E|D]
Encryption enabled / disabled.
cipher [OFF WEP|
AES|TKI
|AUTO|
P]
Specifies the encryption scheme.
defkey [1|2|3|4]
Selects the default WEP key.
wpaphrase [WPA password]
Enter the WPA-PSK password.
The password can be 8 to
63 ASCII characters or
exactly 64 hexadecimal
characters long.
grkint [inter
Specifies th Update
Intervals" in
Interval in seconds,
(0; 36… OFF
val]
e "Group Key
WPA-PSK. 36000), 0 =
supssid [E|D]
Enable / disable Close Wireless
System functionality.
Operating Instructions SCALANCE W78x