Configuration Using Web Based Management and the Command Line Interface
C79000-G8976-C184-07
189
LAN enable (only in access point mode of a W788xRR)
User priori
Specify the priority of the frames of this VAP with the User priority list box. The
priority is evaluated by the connected VLAN-compliant switches (for example,
he ascending numbers. The exception is
e
V
Select the VLAN enable option if you want to enable the VLAN function. If VLAN
enable is selected, all frames of this VAP are given a VLAN tag.
ty (only in access point mode of a W788xRR)
SCALANCE X400) of the network. The priority rises with the ascending numbers:
Note
The priority generally increases with t
priority 0, that has a higher priority than priority classes 1 and 2 and has the sam
priority as class 3.
● 0 - Best Effort (BE)
● 1
tical data traffic
● 2 - Spare
● 3 lent Effort (EE)
● 4 - Cont
● 5 - Voice (VI), < 100 ms latency and jitter
video/multimedia
● 6 - Voice (VO), < 10 ms latency and jitter
voice over IP
PNIO
● 7 - Network Control (NC)
internal network control frames
Default is 0 - Best Effort (BE).
Note
Both voice over IP and PNIO have priority 6.
normal data traffic
- Background (BK)
non time-cri
(--)
this priority is reserved
- Excel
data traffic with highest priority
rolled Load (CL)
Operating Instructions SCALANCE W78x
To Next Page
Loading...
