Configuration Using Web Based Management and the Command Line Interface
C79000-G8976-C184-07
191
yntax of the Command Line Interface S
CLI\BRIDG
scription
EVLAN\VLAN_ID>
Command De
info
Shows the currently configured VLANs and their
relationship to the ports.
add <VLAN-ID> [u [Ports]]
Inse
Ports:
rts a new VLAN.
Specifies the ports
configured for the VLAN.
u: The port is a member of the VLAN.
sent without VLAN
th the VLAN ID 100. Ports 2 and 4
Frames are tag.
Examples:
add 100 u 2 4
Creates an entry wi
are members of this VLAN.
edit <VLAN-ID>
[- [Ports],]
[u [Ports],]
of ports in a VLAN. The
parameters correspond to those of the add command.
Examples:
edit 100 - 2
the V
Changes the membership
Port 2 no loner belongs to LAN with ID 100.
delete <VLAN-ID>
Deletes the VLAN with the specified VLAN ID from the
Econfiguration of the SCALANC W78x.
C ORTS>
Command Description
LI\BRIDGE\VLAN\P
info
Displays an overview of the po
VLAN settings.
r and corresponding ts
vlan <Port> <E|D>
e specified port. Enables / disables VLAN for th
portvid <Port> <VLAN-ID>
LAN tag at the specified
LAN tag with the <VLAN-ID>.
Received frames without a V
port are given a V
portprio <Port> <Priority>
ccording to The priority assigned to untagge
802.1d.
d frames a
member <Port> <all|specific>
er of all VLANs or only the
ID (specific, see above).
The specified port is a memb
VLAN configured in VLAN
Operating Instructions SCALANCE W78x
To Next Page
Loading...
