Description of the SCALANCE W78x
Operating Instructions SCALANCE W78x
34
C79000-G8976-C184-07
A
B
C
D
Figure 3-1 Connectors of the SCAL
As an alternative or in addition to this, u er
supply (position B in Figure 3.1).
You can fit additional antennas to the
SCALANCE W788-2RR with an anten C in Figure 3.1). If you
install the SCALANCE W78x in a cab
must be unscrewed due to the restric
connection is over detached antenna
panel, there is also an identifier for th
on the right-hand side and B connect
SIMATIC NET offers the IWLAN FRNC antenna extension cable for the connection
between the SCALANCE W78x and detached antenna. To avoid violating the
approvals, only antennas released for this product can be used.
Note
T a pair of antennas for the first and se
m
ANCE W78x
yo can also use the M12 plug for the pow
sides of the SCALANCE W788-2PRO and
na cable (position
inet, the antenna (position D in Figure 3.1)
ted communication. In this case, the
s in store outside the cabinet. On the front
e antenna connectors. The A connectors are
ors B on the left-hand side.
he distance between
ust be at least 0.5 m.
cond WLAN interface
To Next Page
Loading...
