Configuring the IP Address with the Primary Setup Tool
Operating Instructions SCALANCE W78x
55
tarting W sed Management
s below to start Web Based Management:
● Select the menu command Module -> Start INC Browser.
● Click on the third icon from the left in the toolbar (module with four blue
wires).
S eb Ba
INCs (Industrial Network Components) such as a SCALANCE W7xx include Web
Based Management. Select the device you want to configure with Web Based
Management and follow the step
If the Module > Start INC Browser and the module icon are disabled, there is no
Web Based Management for the selected module.
Removing a Module
You can remove a module from the list in the left-hand pane of the program
window by selecting the Module > Remove Module menu command. Using this
menu command has no effect on the existence of a module in the network; if you
browse the network again, all modules are displayed again.
C79000-G8976-C184-07
To Next Page
Loading...
