Approvals, certificates, standards
9.5 XR-300M EEC product group
SCALANCE X-300
250 Operating Instructions, 02/2012, A5E01113043-12
Note for the manufacturers of machines
This product is not a machine in the sense of the EC Machinery Directive. There is therefore
no declaration of conformity relating to the EC Machinery Directive 89/392/EEC for this
product.
Explosion protection directive (ATEX)
All variants of the XR-300M EEC with 24 VDC power supply meet the requirements of the
EC directive 94/9/EC "Equipment and Protective Devices for Use in Potentially Explosive
Atmospheres".
WARNING
When using (installing) SIMATIC NET products in hazardous area zone 2, make absolutely
sure that the associated conditions are adhered to:
• "Approval of SIMATIC/ SIMATIC NET Products for Direct Installation in Ex-Zone 2"
You will find this on the Internet on the pages of Siemens Industry Automation Customer
Support under the following entry ID:
33118441 (http://support.automation.siemens.
com/WW/view/en/33118441)
"Entry list" tab > entry type "Certificates"
ATEX code:
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
The product meets the requirements of the standards
● EN 60079-15 : 2005 (electrical apparatus for potentially explosive atmospheres; Type of
protection "n")
● and EN 60079-0:2006
IEC 61850-3 (EN55022 / CISPR22 CLASS A)
The product meets the requirements of the standard IEC 61850-3
(EN55022 / CISPR22 CLASS A).
IEEE 1613
The product meets the requirements of the standard IEEE 1613 CLASS 1 (electrical ports) or
IEEE 1613 CLASS 2 (optical ports).
To Next Page
Loading...
Need help?
General
