Siemens SED2 Series User Manual

26/126
Siemens Building Technologies SED2 variable speed drives CM1U5192en
HVAC Products Electrical installation 01.2002
4.3.1 Access to connection terminals: Frame size A
To access the mains and motor terminals, first remove the operator panel, cover, and
I/O module as illustrated below.
5192J08
1
5192J09
1
5192J16
2
1
Removing the operator
panel (BOP or AOP)
Removing the terminal
cover of the I/O module

Siemens SED2 Series Specifications

General

Enclosure Rating	IP20
Control Method	V/f control, sensorless vector control
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overload, Short circuit, Ground fault
Communication Interfaces	Modbus RTU, USS
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C