Siemens SED2 VFD - Page 2

Startup Procedure and Checklist SED2 Variable Frequency Drives
Document Number 155-718
September 14, 2011
Page 2 Siemens Industry, Inc.
Date: ________________________
Startup Person:
Customer (Company): _________________________ Location: _______________________________________
Serial Number of Drive: ________________________ Serial Number of Bypass: _________________________
Startup Company: ____________________________ Startup person (print): ____________________________
Phone Number: ______________________________ Signature: ______________________________________
Application (circle one): Fan Pump
VFD Start via: _________________________________________________________________________________
VFD Speed Reference via: _______________________________________________________________________
Owner’s Representative:
Printed Name: _______________________________ Phone Number: _________________________________
Company: __________________________________ Signature: ______________________________________
Environmental Conditions:
NOTE: Conditions of area.
Environmental Conditions During Startup:
Dust: ( ) Light ( ) Moderate ( ) High
Contaminants: ( ) None ( ) Metal ( ) Corrosive
Moisture ( ) Low Humidity ( ) High Humidity
( ) Dripping Water ( ) Standing Water ( ) Equipment Flooded
Temperature ( )
60°F to 70°F
(15°C to 21°C)
( )
70°F to 95°F
21°C to 35°C)
( )
95°F to 105°F
(35°C to 40°C)
( )
Above 105°F or Below 60°F
(Above 40°C or Below 15°C)
Environmental Conditions that may occur after Startup: _________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________