Operation 
  6.2 Alarms 
3VA27 molded case circuit breakers & 3WL10 air circuit breakers 
Manual, 10/2018, L1V30499596002-01 
203 
 
The electronic trip units permanently monitor their own status and the status of all connected 
devices. 
Indications of the current status are output via the LEDs (electronic trip units of the 3-series) 
or via the display / warning displays (electronic trip units of the 6-series) of the ETU. 
Indications of ETUs of the 3-series 
 
The electronic trip units of the 3-series display the indications and alarms on the LEDs on 
their front face.  
 
ows the maximum possible number of LEDs. Depending on the version of 
your ETU, they may also have fewer LEDs.
 
Depending on the color and flashing frequency, the LEDs indicate the statuses described 
below.