Siemens SICAM 7KG85X - Page 80

36 SICAM P850/P855 7KG85xx, Product Information
E50417-B1050-C482-A3, Edition 03.2013
The Boot program was started after
pressing softkey F4 during startup of the
device (reset of default IP address).
DHCP active (H1 switches off after
reception of the IP address via DHCP)
The default IP address was applied by
pressing softkey F4.
Boot loader started; no process application
exists.
DHCP active (H1 switches off after
reception of the IP address via DHCP)
The default IP address was applied by
pressing softkey F4.
Boot loader was started because an error
occurred in the process application.
DHCP active (H1 switches off after
reception of the IP address via DHCP)
LEDs Meaning
RUN ERROR
H1 H2
RUN ERROR
H1 H2
RUN ERROR
H1 H2
RUN ERROR
H1 H2
RUN ERROR
H1 H2
RUN ERROR
H1 H2
RUN ERROR
H1 H2
RUN ERROR
H1 H2