Siemens Energy & Automation, Inc.
43
Table 10 - Spare Parts
Logic Board and Cooling Fan Catalog Numbers
Amps Amps Uc = 24V DC Uc = 120V AC Uc = 230V AC
In Line Inside Delta Ue = All Ue = All Ue = All
Logic Board
1/Controller 1/Controller 1/Controller
35 - 960 57 - 1600 3RW3950-6DC28 3RW3950-6DC38 3RW3950-6DC48
Cooling Fan
1/Controller 1/Controller 1/Controller
35 - 105 57 - 195 3RW3950-8DC28 3RW3950-8DC38 3RW3950-8DC48
1/Controller 1/Controller 1/Controller
131 - 248 248 - 414 3RW3960-8DC28 3RW3960-8DC38 3RW3960-8DC48
2/Controller 2/Controller 2/Controller
361 602 3RW3970-8DC28 3RW3960-8DC38 3RW3960-8DC48
3/Controller 3/Controller 3/Controller
480 - 720 720 - 1200 3RW3972-8DC28 3RW3960-8DC38 3RW3960-8DC48
3/Controller 3/Controller 3/Controller
960 1600 3RW3973-8DC28 3RW3960-8DC38 3RW3960-8DC48
10 Spare and Optional Parts
10.1 Spare Parts
Table 10 lists the catalog numbers for the logic board, cooling
fan(s), snubber board(s) and power modules plus the quantity
required for each controller.
10.1.1 Controller Amps, Uc and Ue
Three ratings identify each controller: current (Amps - In Line or
Inside Delta), control supply voltage Uc (24V DC, 120V AC, 230V
AC) and main supply voltage Ue (200-400V AC, 230-575V AC).
Each spare part relates to one or more of the ratings, e.g., each
cooling fan corresponds to the Amps and Uc ratings regardless
of the Ue ratings (Ue = All, where All means either main voltage
selection), whereas, each snubber board corresponds to the
Amps and Ue ratings regardless of the Uc ratings (Uc = All,
where All means any of the three control power choices).
10.1.2 Fan Orientation
From one to three cooling fans are used per controller depend-
ing on the ratings. When one fan is used, it is mounted centrally
along the width of the unit. When two fans are used, one is
mounted to the left (L) and the other to the right (R). Left and
right are defined by facing the cover of the unit, consequently,
the fan on the left is the furthest from the control terminals.
Similarly, when three fans are used, mounting locations are left
(L), center (Ctr), and right (R).
To Next Page
Loading...
