Siemens SIMATIC ET 200SP 6ES7134-6GD01-0BA1 - Page 18

Parameters/address space
4.2 Parameters
Analog Input Module AI 4xI 2-/4-wire ST (6ES7134-6GD01-0BA1)
17 Equipment Manual, 06/2020, A5E03551866-AF
The following parameter settings are possible:
Table 4- 2 Configurable parameters and their defaults (GSD file)
Parameter
Value range
Default
Configura-
tion in RUN
Scope with configuration soft-
ware, e.g. STEP 7 (TIA Portal)
GSD file
PROFINET IO
GSD file
PROFIBUS DP
Diagnostics
No supply voltage L+
• Disable
• Enable
Disable Yes Module Module
Diagnostics
Short-circuit to ground
• Disable
• Enable
Disable Yes Module Module
Diagnostics
Overflow
• Disable
• Enable
Disable Yes Module Module
Diagnostics
Underflow
• Disable
• Enable
Disable Yes Module Module
Diagnostics
Wire break
• Disable
• Enable
Disable Yes Module Module
Measuring type/range
• deactivated
• Current (4-wire transduc-
er) 0..20 mA
• Current (4-wire transduc-
er) 4..20 mA
• Current (4-wire transduc-
er) +/-20 mA
• Current (2-wire transduc-
er) 0..20 mA
• Current (2-wire transduc-
er) 4..20 mA
Current (4-
wire trans-
ducer)
4..20 mA
Yes Channel Channel
Smoothing
• None
• weak
• medium
• strong
None Yes Channel Channel